INSTALL INSTRUCTIONS C-TCB-10
1996-2006 FORD TAURUS
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Ratcheting Wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
Powered drill w/ drill bit set
Standard Open-end wrench set
HARDWARE:
QTY DESCRIPTION
PART #
1
1
1
1
1
2
1
2
4
1
5
2
2
1
Pole support assembly
Telescoping pole
Under floor plate
Lateral support brace
Side support brace
¼-20 Nylock nut
5/16-18 Nylock nut
3/8-16 Nylock nut
¼” Flat washer
5/16” Flat washer
3/8” Flat washer
¼-20 x ¾” Hex head bolt
3/8-16 x ¾” Hex head bolt
3/8-16 x 1 ¼” Hex head bolt
CM93071-10
CM93072-1
CM93132
CM93148
CM93149
GSM30016
GSM30017
GSM30018
GSM31005
GSM31006
GSM31007
GSM33001
GSM33027
GSM33029
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. Remove front passenger seat base trim.
INSTALLATION:
1. MOUNT POLE SUPPORT ASSEMBLY:
• Align pole support assembly’s slotted hole with similar slot on seat base and loosely
attach using 3/8-16 x ¾” bolt, washer and nut.
• Loosely attach smaller slot on assembly to seat base using ¼-20 x ¾”
• Repeat these processes attaching the side support brace to passenger seat base.
• Now loosely attach the side support brace and lateral (forward) support base to pole
assembly using 5/16” Nylock nut.
|
Broan 171H User Manual
Carrier 38GS User Manual
Carrier 50SX024 060 User Manual
Chevrolet Air Conditioner Chevrolet Camaro User Manual
Chromalox PF411 10 User Manual
Dakota Digital LED Tail Lights LAT NR410 User Manual
Frigidaire HEAVY DUTY AIR CONDITIONER User Manual
GE General Electric Air Conditioner AVX07 User Manual
Heat Controller Inc Air Conditioner DMH24SB 1 User Manual
HP Hewlett Packard Photosmart C7100 User Manual