Model SA8260 User Guide
Super Audio CD Player
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality
and safety standards. There are, however, some installation and
operation precautions which you should be particularly aware of.
12. Grounding or Polarization – This product may be equipped
with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
1. Read Instructions – All the safety and operating instructions
should be read before the product is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should
be followed.
5. Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
AC POLARIZED PLUG
13. Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the product.
6. Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7. Water and Moisture – Do not use this product near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
14. Protective Attachment Plug – The product is equipped with an
attachment plug having overload protection. This is a safety
feature. See Instruction Manual for replacement or resetting of
protective device. If replacement of the plug is required, be
sure the service technician has used a replacement plug
specified by the manufacturer that has the same overload
protection as the original plug.
8. Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
15. Outdoor Antenna Grounding – If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See Figure 1.
9. A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the product and cart combination to overturn.
16. Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
10. Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have
been adhered to.
17. Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
11. Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
19. Object and Liquid Entry – Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
20. Servicing – Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
22. Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
21. Damage Requiring Service – Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
23. Safety Check – Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
24. Wall or Ceiling Mounting – The product should be mounted to a
wall or ceiling only as recommended by the manufacturer.
c. If the product has been exposed to rain or water.
25. Heat – The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way, and
f. When the product exhibits a distinct change in performance –
this indicates a need for service.
FIGURE 1
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO
NATIONAL ELECTRICAL CODE INSTRUCYIONS
CONTAINED IN ARTICLE 810 -"RADIO AND TELEVISION EQUIPMENT"
ANTENNA LEAD
IN WIRE
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC,
which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
NOTE:
aged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV tech-
nician for help.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encour-
NOTE:Changes or modifications may cause this unit
to fail to comply with Part 15 of the FCC Rules and may
void the user's authority to operate the equipment.
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la Classe B est
conforme á la norme NMB-003 du Canada.
CONTENTS
INTRODUCTION .........................................................................................................2
Product Features .....................................................................................................2
About super audio ...................................................................................................2
Playing CD-RW discs ..............................................................................................2
Applicable Discs to the Unit.....................................................................................2
PREPARATION ...........................................................................................................3
Compact discs .........................................................................................................3
Precautions .............................................................................................................4
Using Remote Control Unit......................................................................................4
Loading batteries .....................................................................................................4
Names of parts and their functions..........................................................................5
CONNECTIONS ..........................................................................................................7
Connecting to a 2-channel (Analog / Digital) stereo amplifier/receiver ...................7
Connecting to an analog multi-channel amplifier/AV receiver .................................8
The Speaker Setting of SACD for Multi-Channel Audio ..........................................9
OPERATION..............................................................................................................10
Connecting the power supply ................................................................................10
Normal Playback ...................................................................................................10
Search/Skip ...........................................................................................................12
Repeat Play ...........................................................................................................12
Random Play .........................................................................................................13
Program Play.........................................................................................................13
AMS Play...............................................................................................................14
About TEXT Information Display ...........................................................................15
About TEXT ...........................................................................................................15
Timer Play .............................................................................................................16
Filter Switch ...........................................................................................................16
TROUBLE SHOOTING..............................................................................................17
SPECIFICATIONS .....................................................................................................55
1
INTRODUCTION
Product Features
Applicable Discs to the Unit
This unit can playback the outstanding sound performance
in Super Audio CD. This unit has the following unique features.
1. Super Audio CD
• D/A converter section that accurately converts DSD/CD
signal into high-quality analog signal with the DEM(Dynamic
Element Matching) Super DAC(CS4397).
There are three types of Super Audio CDs.
• Single-layer Disc
• Dual-layer Disc
• Low-noise low-distortion filter circuit and high-speed current-
feedback-type output amplifier with the differential input type
HDAM.
• Hybrid-layer Disc
• Text information display function that can display disc titles,
track titles etc. in Super Audio CD/CDs.
SACD Disc Types
Hybrid-layer Disc
Dual-layer Disc
• CD-R/CD-RW discs can be played.
Single-layer Disc
HD layer
HD layer
CD layer
HD layer
About super audio
And each type may contain two areas of recorded information.
• High quality stereo area
• High quality multi-channel area
The Super Audio standard is based on Direct Stream Digital
(DSD) technology. This new direct-stream digital format
comprises a 1-bit system that has a digital sampling frequency
that is 64 times higher than that of conventional audio CD.
The results are spectacular: a frequency response of over
50k Hz and a 120 dB dynamic range over the entire audible
spectrum. Mixed with as many of the original frequencies as
possible, the audio information audible for human ears sounds
much more natural.
All audible frequencies are, after all, embedded in the
frequency range as emitted by the sound source. A better
reproduction does not exist! For the first time your ears will
relive reality.
• Single Layer Disc
It can contain both high quality stereo area and high quality
multi-channel area information.
• Dual Layer Disc
It can contain both high quality stereo area and high quality
multi-channel area information. And a double amount of
information can be stored on the disc thanks to the second
layer.
• Hybrid Layer Disc
The hybrid disc may contain not only both information areas
but also a second, standard CD layer, making it playable
on standard CD players.
Playing CD-RW discs
Hybrid SACD-Disc
This unit can play back the CD-RW (ReWritable) discs as well
as ordinary music CD and CD-R (Recordable) discs.
1
CD layer that plays on any of your
existing CD players
• The CD-R and CD-RW discs should contain properly-
recorded TOC information so that they can be played back.
With the CD recorder system, writing the TOC information
in a disc is referred to as finalizing the disc. A disc cannot
be recognized as a CD disc and played back unless it has
been finalized properly. For details, please read the
instruction manual provided with a CD recorder.
High-Density layer containing:
- High-Quality DSD Stereo
- High-Quality DSD Multi-channel
2
3
* TOC stands for Table Of Contents and contains information
such as the total number of tracks and total playing time
of the disc.
The number of tracks recorded may vary per layer. It will be
shown on the display window of the unit.
• This unit can play only the discs recorded in the CD-DA
format designed for music reproduction. Do not attempt to
play a disc containing other data, such as a CD-ROM for
PCs, on this unit.
2. Audio CD (CDDA)
• As the playback of a CD-RW disc necessitates partial
change of the player setup, it may take longer time for
reading the TOC information than when a music CD or CD-
R disc is played.
Audio CDs contain music tracks only.
2
PREPARATION
Compact discs
The glossy side shining like a rainbow is the front side of the
disc, and the side on which the label is printed is the back.
Unlike conventional turntables for playing analog discs, the
SA8260 Super Audio CD Player reads the information
recorded on the disc from underneath without contacting it
using a beam of laser light. Therefore, the performance of a
compact disc will not degrade like conventional analog
records.
Handle discs carefully so as not to damage or scratch the
front side.
To protect the disc, avoid placing it in the following locations:
–
–
–
In direct sunlight or near a source of heat like a heater.
In a place which is damp or dirty.
In a place which could be exposed to rain, such as near a
window.
Always keep the disc surface clean.
Up to six billion data units are recorded on the front side of
the disc. When cleaning the disc surface, always be sure to
use a special compact disc cleaner and wipe as shown below.
Wipe in a radial direction.
Do not wipe in circumferential direction.
•
Do not use conventional record cleaner for analog records,
as this will adversely affect the disc surface.
Store discs properly by placing them in their disc cases.
•
Do not attach a piece of paper or sticker on the label side
of disc.
When a disc has a piece of plastic tape or rental CD label
with paste protruded from the edge or when a disc has a
trace of such a sticky object, do not attempt to play the
disc. If such a disc is played on the CD player, impossibility
of taking out the disc or other malfunction may result.
•
Do not use a disc with a special shape.
Do not attempt to play a disc with a special shape such
as a heart-shaped disc or octagonal disc. Otherwise the
equipment malfunction may result.
3
Precautions
Loading batteries
Batteries in this remote control unit have a life of approximately
1 year under normal operating conditions. If the remote control
unit is not going to be used for an extended period of time,
remove the batteries. Also, if you notice that the batteries are
starting to run down, replace them as soon as possible.
• In winter, windows on a well-heated room you can see water
drops on it or the window get fogged. It is called dew. Super
Audis CD players have an optical lens so dew may form on
it under those circumstance.
- In a room that heating has just started.
- In a high-humid room.
q Remove the battery cover.
- When the unit is brought to a warm room from a cold
place.
If dew is on the lens track information cannot be read and
the unit malfunctions. So please wait about 30 minutes to
play.
• The unit may interfere with a tuner and TV. If it happens set
the unit with a distance from the tuner and TV.
w Insert the batteries with correct +/– orientation.
• Noise level is far less than analog discs so noise can hardly
be heard until music starts. If the volume of the amplifier is
set loud, other audio components may be damaged.
Two AA-size (R6) batteries
• This unit can playback only Super Audio CDs and normal
music CDs. The following disks cannot be played. CD-
ROMs for personal computers, Game CDs, Video CDs,
DVDs(Video/Audio), DTS-CDs, etc.
To prevent any accidents, please set the unit
close to the power outlet so that you can unplug
it quickly.
e Close the battery cover until it clicks shut.
Using Remote Control Unit
I Remote control
Operate the remote control unit (SA8260) within a distance of
approx. 5 m from the infrared signal reception window (remote
sensor) on the front of the SACD player.
Remote control operation may not be possible if the remote
control unit’s transmitter is not pointing in the direction of the
remote sensor or if there is an obstruction between the
transmitter and the remote sensor.
Handling Batteries
Improper use of batteries may cause fluid leakage or
explosion. Be careful in the following points.
• Insert batteries correctly in the +/- polarity direction as
indicated on the unit.
• Do not use brand-new batteries and used batteries
together.
Remote control operating range
Super Audio CD player
SA8260
• Dry cell batteries may generate different voltages even
though their shapes are the same. Do not use different
types of batteries together.
• Some batteries are rechargeable and some are not.
See cautions on batteries carefully to use.
Approx. 5m
60¡
Remote control unit (RC8260SA)
4
⁄
,
(Track Skip/Search
Names of parts and their functions
buttons)
These buttons can be used as both track skip and track search
buttons. (The buttons on the main unit only.)
Please read the following instructions referring to the illustration
on page 56.
: Each time this button is pressed, the track being
played is skipped forward. When this button is
held down, tracks are searched forward (Fast
Forward).
I FRONT PANEL
z
switch
POWER
STANDBY indicator
: When this button is pressed, the unit goes back
to the beginning of the current track. If the button
is pressed more times, the track being played is
skipped back. When this button is held down,
tracks are searched backward (Fast Rewind).
In program play, Fast Forward and Fast Rewind can be done
in the playing track only.
Press this switch to turn ON the unit, press it again to turn into
STAND-BY and stand-by indicator will light.
x DISC TRAY
c REMOTE SENSOR
This window is to receive signals from the remote control unit.
⁄
PAUSE button
Press this button to pause playback. If pressed again, the
unit returns to playback.
v DISPLAY WINDOW
This window shows status of the unit.
⁄
STOP button
Press this button to stop playback. Also this button is used to
clear all programs.
b
SOUND MODE button
This button is to select sound mode on a Super Audio CD.
Select from Multi-Channel, Stereo and CD (if available). ( See
page 11)
⁄
PLAY button
Press this button to start playback.
TIME
n
button
OPEN/CLOSE
button
Press this button to open the tray. Put on a disk label side up.
Press the button again to close the tray.
This button is to change information displayed from text
information to time information when playing a disc with text.
Also this button can change time information displayed. Each
time it is pressed, the display changes in the following order.
“track elapsed time” → ”track remaining time” → ”total
remaining time” → “track elapsed time” ( See page 11)
⁄
⁄ DISPLAY OFF
Press this button to turn on and off the information display
window.
TEXT
m
button
When a disc with text is being played, this button changes
information displayed from time information to text information.
( See page 15)
When a disc without text information is being played, “No
Text” will be displayed.
⁄ CD
This indicator lights when an audio CD disc is lorded, or a
hybrid SACD disc is loaded and the sound mode is in CD.
⁄ SACD STEREO, SACD MULTI
It indicates the sound mode when a Super Audio CD is loaded.
,
DISPLAY button
This button can turn on and turn off the display window.
. PHONES jack
This jack is to connect the headphones.
⁄ LEVEL
This is to adjust the headphone volume.
* In SACD multi-channel play, front L/R channels will be output.
# In this instruction manual, some operations can only be performed with the remote control. For operations that can be
performed with buttons both on the main unit and on the remote control, the button names are shown in the mark.
And for operations that can only be performed with buttons on the remote control, the button names are shown in the
mark.
5
RANDOM
This button is for random play. (See page 13)
¤
button
I REMOTE CONTROLLER
z
b
n
m
⁄
⁄
⁄
⁄
⁄
button
POWER
SOUND MODE button
AMS
¤
(Automatic Music Scan button)
Use this button for AMS play. (See page 14)
TIME
TEXT
button
button
REPEAT
¤
button
This button is for repeat play. Each time this button is pressed,
repeat mode changes as follows. “All Repeat” → “Track
Repeat” → “Repeat Off” (See page 12)
button
PAUSE
STOP button
button
I REAR PANEL
PLAY
OPEN/CLOSE
button
DISPLAY OFF button
A MULTI CHANNEL AUDIO OUT (Analog output)
FRONT L/R
SURROUND L/R : Output for surround speakers
CENTER
: Output for front speakers
The buttons listed above are the same to the buttons on the
front panel of the main unit.
Please see the correspond items in “Front Panel” section.
: Output for center speaker
: Output for sub woofer
SUB WOOFER
B FILTER STANDARD/CUSTOM
⁄
-
(Numerical buttons)
0
9
(Filter standard/custom switch)
Set this switch according to the amplifier and speakers to be
connected. For more details, refer to “Filter Switch” section
on page 16.
* Switching the filter setting has to be done while the unit is in
stand-by mode. If the setting is switched while playing, noise
may occur.
Use these buttons to select tracks directory.
PROGRAM
¤
button
This button is for program play. (See page 13)
¤
,
(Track skip buttons)
: Each time this button is pressed, the track being
played is skipped forward.
C DIGITAL OUT OPTICAL
: When this button is pressed, the unit goes back
to the beginning of the current track. If the
button is pressed more times, the track being
played is skipped back.
It outputs the playing CD signal in digital format. This jack is
to be connected with a recording device, amplifier, D/A
converter, etc that has optical digital input using an optional
square type optical digital cable.
* Search buttons are provided separately for the remote
control unit. Use ¤ Search buttons for search function.
* No signal will be output when a SACD is played.
D DIGITAL OUT COAXIAL
¤
¤
,
(Search buttons)
It outputs the playing CD signal in digital format. This jack is
to be connected with a recording device, amplifier, D/A
converter, etc that has coaxial digital input using an optional
coaxial digital cable.
: While this button is pressed during playback,
tracks are searched backward.
: While this button is pressed during playback,
tracks are searched forward.
* No signal will be output when a SACD is played.
SCROLL/RECALL
button
E REMOTE CONTROL IN/OUT
Connecting with a remote cable, this unit can be controlled
Use this button to scroll text while displaying text information
in a disc with text.
Also, this button is to check programmed tracks for program
play. (See page 14)
by another Marantz unit that has D-bus function.
F EXT./INT. (External/Internal switch)
When using the unit as standalone, set this switch to INT.
position. If this unit is connected to another Marantz unit with
D-bus function and remote control sensor, set the switch to
EXT. position.
CANCEL
¤
button
Use this button to cancel a programmed track. (See page
14)
* If the unit is used as standalone and the switch is set to EXT.
position, remote control unit cannot be used.
A-B
¤
(A-B Repeat button)
This button is to determine starting and ending points for A-B
repeat play. (See page 12)
G AC POWER INPUT JACK
Connect the supplied power cord to this jack and a household
AC power outlet.
6
CONNECTIONS (Connecting to audio components – Analog/Digital)
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection
please refer to instruction manuals of stereo system to be connected.
Caution: Do not connect output from this unit to PHONO input of your audio system.
Connecting to a 2-channel (Analog / Digital) stereo amplifier/receiver
1. Connect the audio cable q to this unit’s front speaker outputs and the stereo inputs on your amplifier, receiver or stereo
system.
2. To play a SACD disc with this connection, set the SOUND MODE to STEREO.
3. Connect the optical cable r, coaxial cable t to the digital input on your AV amplifier, D/A converter, CD-R, etc..
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when a CD disc is played. When playing a SACD disc,
no signal will be output.
AC IN
MULTI CHANNEL AUDIO OUT
SA8260
SURROUND
CENTER
SUB
WOOFER
L
R
FILTER
DIGITAL AUDIO OUT REMOTE CONTROL
FRONT
OPT. COAX.
IN
L
R
STAN-
DARD
CUS-
TOM
EXT.
INT.
OUT
To Analog Audio output
To Digital Audio output
(white) (red)
(Optional)
r
t
(Optional)
Audio cable q
(Supplied)
To audio input terminals
on amplifier
INTEGRATED AMPLIFIRE PM6100SA
INPUT SELECTOR
VOLUME
Connect to digital input
terminals of receiver, D/A
converter or CD recorder,
etc..
Example)
PM6100SA
MD/TAPE
CD-R
AUX/DVD
TUNER
CD
PHONO
REC SELECTOR
OFF
BASS
TREBLE
BALANCE
MIN
SPEAKER
MAX
POWER ON/OFF
SOURCE DIRECT
TUNER
AUX/DVD
CD
PHONES
MUTE
LOUDNESS
PHONO
CD-R
MD/TAPE
COPY
MD/TAPE
CD-R
ON
OFF
ON
OFF
ON
OFF
+
+
R
-
-
L
Right speaker
Left speaker
7
Connecting to an analog multi-channel amplifier/AV receiver
This unit can play multi-channel recorded SACD discs. For multi-channel play, select “MULTI” with SOUND MODE button on the
unit or remote.
1. Connect the audio cable q to this unit’s front speaker outputs and corresponding inputs on your amplifier/receiver.
2. Connect the audio cable w to this unit’s surround speaker outputs and corresponding inputs on your amplifier/receiver.
3. Connect the audio cable e to this unit’s center speaker and sub-woofer outputs and corresponding inputs on your amplifier/
receiver.
AC IN
MULTI CHANNEL AUDIO OUT
SURROUND
CENTER
SUB
WOOFER
L
R
FILTER
DIGITAL AUDIO OUT REMOTE CONTROL
SA8260
FRONT
OPT. COAX.
IN
L
R
STAN-
DARD
CUS-
TOM
EXT.
INT.
OUT
To Analog Audio output
(white) (red) (white) (red) (white) (red)
(Supplied)
(Supplied)
(Supplied)
Example)
To 6ch input terminals on amplifier
PM8100SA + SM6100SA
2
INTEGRATED AMPLIFIRE PM8100SA
I
N
P
U
T
S
E
L
E
C
T
O
R
VOLUME
MD/TAPE
CD-R
DVD
TUNER
CD
PHONO
PM8100SA
MULTI CHANNEL
REC SELECTOR
OFF
BASS
TREBLE
BALANCE
MIN
SPEAKER
MAX
POWER ON/OFF
TUNER
DVD
CD
PHONES
MUTE
MULTI CHANNEL
SOURCE DIRECT
PHONO
CD-R
MD/TAPE
COPY
MD/TAPE
CD-R
ON
OFF
ON
OFF
ON
OFF
-
+
-
+
L
R
Front speaker (Right)
Front speaker (Left)
SM6100SA
POWER AMPLIFIRE SM6100SA
STANDBY
POWER ON/OFF
Sub woofer
Center speaker
POWER AMPLIFIRE SM6100SA
STANDBY
SM6100SA
POWER ON/OFF
Surround speaker
(Left)
Surround speaker(Right)
Front speaker
Front speaker
(Left)
(Right)
Center
speaker
Sub woofer
* See page 9 for proper
speaker settings.
Surround speaker
(Left )
Surround speaker
(Right)
8
Connection (Speaker Setting)
The Speaker Setting of SACD for Multi-Channel Audio
We recommend you to use ITU (International Telecommunication Union) speaker setting because SACD multi-channel discs are
recorded and mixed down to hear the best quality sound when this setting are used.
The basic settings are 3 speakers for front and 2 for back since multi-channel discs have basically 5 channels (3 to 6 channels
possible). There are some discs which has the 6th channel for sub-woofer. The number of channels recorded is shown on the disc.
When you use different sizes of speakers, please adjust the volume balances in your amplifier/surround receiver. You can also use
the 5.1 channel surround setting for DVD but surround sound may present differently form the best SACD multi-channel sound
presence.
Sub-woofer
Center
speaker
Front speaker
(Left)
Front speaker
(Right)
60°
approx. 110°
approx. 110°
Reference listening
position
Rear speaker
(Left Surround)
Rear speaker
(Right Surround)
The 2-front, 1-center, and 2-surround speakers should be set on the circle from the listening point as shown above. The location
of the sub-woofer in the picture is just to you a patter of settings. Sub-woofer can be located any place in your room. (See the
users manual of your sub-woofer.)
9
OPERATION
# In this instruction manual, some operations can only be performed with the remote control. For operations that can be
performed with buttons both on the main unit and on the remote control, the button names are shown in the
mark.
And for operations that can only be performed with buttons on the remote control, the button names are shown in the
mark.
Connecting the power supply
Normal Playback
I SACD player playback
SUPER AUDIO CD PLAYER SA8260
1 Plug the power cable into AC IN jack on the back panel.
STEREO
SACD
MULTI
CD
DISPLAY OFF
PLAY
STOP
PAUSE
OPEN/CLOSE
/
/
STANDBY
POWER ON/STANDBY
PHONES
LEVEL
SOUND MODE
TIME
TEXT
DISPLAY
-
+
AC IN
q Press
switch to turn on.
POWER
Display indications
2 Turn on the power switch of the audio unit (amplifier, etc.)
that is connected with this unit. Set the selector on the
connected unit to this unit.
w Press
OPEN/CLOSE button.
3 Plug the power cable into an AC outlet.
The disc tray opens. Set a disc on the tray. Make sure the
label side is up.
* The unit turns into stand-by mode and stand-by indicator
lights.
e Press
r Press
OPEN/CLOSE button.
PLAY button.
Disc type is automatically detected and playback is
started. Track number and track elapsed time(minute,
second) appear on the display.
* When a SACD/CD hybrid disc is loaded, SACD layer is
automatically played. If you want to play CD layer, use
SOUND MODE
button to select CD layer.
(Exp.:Track 6, Elapsed time 2 min 8 sec)
Number of current track
Minutes Seconds
TRK
TIM E
6
7
8
9
10 1112 1314 1516 1718 1920
Remaining track numbers
Playback automatically stops at the end of the final track.
10
1. Press
button in stop mode
To start playback form the first track
SOUND MODE
(not playing).
Press
PLAY button.
The layer or area currently in is shown on the display. (CD,
SACD STEREO, SACD MULTI) While selecting, sound
mode indicator will flash.
To stop playback
STOP
Press
button.
To eject disc
Press
OPEN/CLOSE button to open the disc tray and take
the disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
SOUND MODE
If
button is pressed again, a selectable
layer or area will be shown. About 2 seconds after the
layer or area will be switched to new one.
To pause playback
Press
PAUSE button.
* When layer or area is switched, TOC will be read again.
PAUSE indicator will light and playback is paused at the point
that the button is pressed. To restart playback, press
* If a CD disc or SACD disc with stereo area only is loaded,
sound mode cannot be changed.
PAUSE button again or press
PLAY button.
* When a hybrid SACD disc that has both stereo and multi-
channel areas is loaded, sound mode will be changed
in the following order.
SACD multi-channel area → SACD stereo area → CD
layer
To change time display
TIME
Press
Each time
button.
TIME
button is pressed, display will change in the
following order. “Track elapsed time” → “Track remaining time”
→ “Total remaining time” → “Track elapsed time”.
* Sound mode can be selected while the tray is open.
Select a desired layer or area and press
PLAY
button then the tray will close and playback will be
started.
• Track remaining time
(The remaining playing time from the playing point to the end
of the current track)
• Displaying the number of tracks in a SACD multi-
“-” is displayed
channel disc
SOUND MODE
If
button is pressed once during playback,
TRK
TIM E
the number of channels being played will be shown.
1516 1718 1920
Number of channels is displayed
• Total remaining time
(The remaining playing time from the playing point to the end
of the last track)
“-” is displayed “TTL (TOTAL) is displayed
Examples
6ch : Sub-woofer channel will be played.
5ch : Sub-woofer channel will not be played.
For some discs recorded in 4ch or 3ch,
“5ch” will be displayed.
TRK
TTL TIM E
1516 1718 1920
4ch or 3ch : If loaded disc is made to show the channel
display, 4ch or 3ch will be displayed.
TIME
* If
button is pressed when a disc with text is played,
time display is given priority and text information will not be
displayed afterward. To see text information, press TEXT
button.
* See software (disc) jacket or attached instraction for signal
output terminals for 4ch or 3ch discs.
I Switching Sound Mode (SACD)
Sound mode indicator
SUPER AUDIO CD PLAYER SA8260
STEREO
SACD
MULTI
CD
DISPLAY OFF
PLAY
STOP
PAUSE
OPEN/CLOSE
/
/
STANDBY
POWER ON/STANDBY
PHONES
LEVEL
SOUND MODE
TIME
TEXT
DISPLAY
-
+
11
Search/Skip
Repeat Play
I Direct Search (Specify track number to
I All track repeat
REPEAT
When
button is pressed, “RPT” indicator will light
play)
and all track repeat play begins.
Specify track number with NUMBER buttons (0-9)
To Return to Normal Play
3rd track : Press
.
3
REPEAT
Press
button two times. “RPT” indicator will
2
12th track : Press
1
and then press
(within
disappear, repeat mode will be off and it returns to normal
play mode.
approximately 1.5 seconds).
If the first pressed number is only in the digit of ones and not
in the digit of tens, search begins approximately 0.5 second
after.
* If REPEAT button is pressed when in program mode,
programmed tracks are played repeatedly.
If a wrong number is pressed
Press correct number again.
I One Track Repeat
Press REPEAT button two times when the track is being
played. “RPT”, ”1”indicators will light and the track will be
played repeatedly.
• If a track number that is not in the disc is specified, “No
Track” will be shown on the main display. Please specify a
correct track.
To Exit from One Track Repeat
Press REPEAT button.
I A-B Repeat
q Press
button at your chosen starting point. “A-“
A– B
indicator will light.
I Search
If
,
buttons on the main unit or
,
w Press
button again at your chosen end point. “B“
A– B
buttons on the remote are kept pressing during
indicator will light and the chosen section will be played
repeatedly.
playback, track search begins. Release the button when the
point you want to listen to gets close.
* No sound can be heard during search.
I To Exit from A-B Repeat
Press
button. “A-B” indicator will disappear, A-B repeat
A– B
I Track Skip (
,
on the
on the remote)
mode will be off and it returns to normal play mode.
main unit,
,
* A-B repeat cannot be done when random play is going on.
To listen to a track posterior to the current track
Press
button the number of times you want to proceed
tracks.
To listen to a track prior to the current track
Press
button go back to the beginning of the current
track. Then press
to go back.
button the number of times you want
• If
it jumps to the last track. If
last track, it jumps to the first track.
button is pressed at the beginning of the first track,
button is pressed in the
12
Random Play
Program Play
When
button is pressed, the unit shuffles track
RANDOM
I Program (Listen to Favorite Tracks in
order and plays all the tracks in the shuffled order. It can be
done in both playback and stop modes.
Favorite Order)
(Example: To program the 7th track in a disc with 15 tracks)
• The gap between tracks will be approximately 4 seconds
during random play.
TRK
TTL TIM E
1
2
3
4
5
6
7
8
9
10 1112 1314 15
3
4
5
6
7
8
9
10
q Press
button in stop mode. “PROG” indicator
PROG
will flash and it goes to program mode.
If
button is pressed when the disc tray is open
RANDOM
and a disc is set, the tray will automatically close and random
play will begin.
Blinks
To Exit from Random Play and Return to Normal Play
PROG
Press
button again.
RANDOM
TRK
TTL TIM E
If
Button is Pressed during Random Play
It jumps to the next track of the shuffled order.
w Choose a track to be programmed with numeric buttons
on the remote or buttons.
If
or
Button is Pressed during Ran-
,
dom Play
(Example: The 15th track is chosen and it’s length is
4min30sec)
Search will be done only in the current track. Search does not
go to the previous or next track.
Blinks
PROG
To Listen to Random Play Repeatedly
TRK
TTL TIM E
REPEAT
Press
button once during random play. Every time
15
the order will be shuffled.
Only the numbers of programmed tracks light up
RANDOM
• If
button is pressed during program play, the
e With the sequence described in step w above, program
another track. Repeat that sequence to program all the
tracks you want. You can program up to 30 tracks.
programmed tracks will be shuffled.
(Example: The 7th track is chosen and total length of 7th and
15th is 7min50sec)
Blinks
PROG
TRK
TTL TIM E
7
15
Total playing time of programmed tracks
r When you finish programming, press
button or
button. Flashing “PROG” indicator will lights
PROG
STOP
constantly. Program has been settled.
Flashes
PROG
TRK
TTL TIM E
7
15
Total playing time of
programmed tracks
Total programmed
number
t Press
PLAY button to starts playback in programmed
order.
* You can skip the sequence r and press
PLAY button
to start program play.
13
To Check Programmed Tracks
Q&A
SCROLL/RECALL
Press
button while programming or
program play (when “PROG” indicator is flashing or lights).
Programmed tracks will be displayed in programmed order.
• How many tracks can be programmed?
Up to 30 tracks can be programmed for program
play.
To Delete a Programmed Track
• Can I listen to program play repeatedly?
SCROLL/RECALL
q Press
button in stop mode when
Press
button once. “RPT” indicator will
REPEAT
program has been made (when “PROG” indicator lights
or flashes). Programmed tracks will be displayed in
programmed order.
light and program play will be repeated.
• Can I shuffle the programmed track order?
Press
button during program play or in
RANDOM
w When the track you want to delete appears on the display,
stop mode.
press
button at once. The deleted track’s track
CANCEL
number indicator will disappear.
To Clear Whole Program
STOP
Press
button two times while in program play. In
STOP
stop mode, press
or
button once.
CANCEL
Program can also be cleared by pressing
key to open the disc tray.
OPEN/CLOSE
To Add Tracks to Program
AMS Play
Press
button when program is remaining (“PROG”
PROG
indicator is constantly on) and in stop mode. “PROG” indicator
will flash and tracks can be add to the end of program.
AMS
If
button is pressed in stop mode or in playback mode,
PLAY “3” indicator will flash and the beginnings of all the
tracks will be played for 10 seconds each starting from the
first track. This feature is convenient to search where your
favorite track is.
* Please be careful about the following matters.
• When programming 1st to 9th tracks in a disc that has over
10 tracks by using numeric buttons,. For instance,
programming the 3rd track after programming the 1st track,
Blinks
press
after
button more than approximately 1.5 seconds
button is pressed.
3
TRK
1
1
2
3
4
5
6
7
8
9
10 1112 1314 15
• Likewise, when programming a track at 10th or after. For
example, to program 13th track, press button within
approximately 1.5 seconds after button is pressed.
3
When you have found the favorite track, press AMS button
again. PLAY indicator will light constantly and normal playback
will begin from the current track.
1
• When programming a track in a disc that has less than 9
tracks. For instance, to program the 5th track after 4th track
AMS
has been programmed, press
approximately 0.5 second after
5
button more than
button is pressed.
* If
button is pressed after tracks have been
4
programmed, only the selected tracks will be played with
AMS.
• When programming with
, and
buttons, press
the buttons repeatedly until the track you want appears.
And the gap has to be less than 0.5 second.
14
About TEXT Information Display
About TEXT
The following items of text information in a disc with text can
TEXT is a new type of music disc that contains text information
like artist name, album title, music title, etc. CDs with the logos
shown below and most SACDs have text information.
be displayed by pressing
button. Nevertheless, which
TEXT
items of information are recorded depends on discs so some
information may not be displayed. This unit skips unrecorded
information to display.
CD TEXT
TEXT
• During Playback
Each time
button is pressed, text information will be
This text information is recorded on a area which is not used
for ordinary music CDs. Therefore music CDs with text
information can be played with ordinary CD player. And the
text information can be displayed with players that has TEXT
feature.
TEXT
displayed in the following order. In general, information of the
playing track will be displayed during playback.
Title of the xxth track currently playing
↓
(Display will automatically change from text display to time display)
This unit automatically detects whether text information is
recorded and shows it on the display window.
Album Title
↓
Main unit display
xx Title
↓
TRK
TTL TIM E
xx Artist
↓
TEXT
1
2
3
4
5
6
7
8
9
10 1112 1314 1516 1718 1920
xx Songwriter
Lights up when the loaded disc has text information
↓
xx Composer
↓
xx Arranger
↓
Album title, track title, artist name, songwriter name, composer
name, arranger name, can be displayed by operating main
unit and remote control. Be noticed that those information items
are not always recorded all in a disc.
Time Display
• This unit can display 12 characters in one time. If information
is longer than 12 characters, the display will scroll right to
left.
• In Stop Mode
Each time
displayed in the following order.
• This unit can display only alphabets, numeric numbers and
symbols. Chinese and Japanese characters cannot be
displayed. If information is in Chinese and Japanese
characters, the unit displays nothing.
button is pressed, text information will be
TEXT
Time Display
↓
Album Title
↓
Album Artist
↓
-- Title
If
PLAY button is pressed while -- Title is displayed, that
track will be played.
The maximum number of characters to be displayed is 64
characters.
15
Timer Play
Filter Switch
This unit can perform timer play by cooperating with your audio
timer.
Connect this unit’s power cord to the audio timer’s power
socket and the timer’s power cord to power outlet.
FILTER
STAN-
DARD
CUS-
TOM
* For connection to audio timer and it’s operation, please refer
to the instruction manual of your audio timer.
Super Audio CDs have a wide playback frequency band of
100 kHz that is beyond the audible range: this means that
their signals contain ultra-high-range components that
conventional CDs do not have. A conventional amplifier is
often not built to reproduce signals containing these
components, and when Super Audio CD signals are output in
their original state, noise may be generated, the amplifier’s
protection circuits may be activated and/or the speakers may
be damaged.
SA8260
Audio Timer
AC IN
To prevent this sort of trouble from occurring, the unit
incorporates a filter (STANDARD) for attenuating the ultra-high-
range components, and the filter can be set STANDARD or
CUSTOM using a switch on the rear panel. (This switch is set
to STANDARD when the unit is shipped from the manufacturing
plant.)
When the unit is to be connected with a next-generation
amplifier that supports Super Audio CDs and set the switch
to CUSTOM for use. This will ensure play with a wider
frequency range.
Setting Timer of Play On/Off
SUPER AUDIO CD PLAYER SA8260
STEREO
SACD
MULTI
CD
DISPLAY OFF
PLAY
STOP
PAUSE
* Use the switch at the STANDARD position if the unit is to be
used with a regular amplifier. Otherwise, the amplifier and/
or speakers may be damaged.
OPEN/CLOSE
/
/
STANDBY
POWER ON/STANDBY
PHONES
LEVEL
SOUND MODE
TIME
TEXT
DISPLAY
-
+
* Even when the unit has been connected with an amplifier
that supports Super Audio CDs, change the switch to the
STANDARD position when recording Super Audio CD sound
on a tape deck, for instance.
q Press STOP button for 2 seconds in stop mode.
Timer play is activated and “Timer On” will be displayed.
* Do not change the switch setting while the unit is in stand-
by mode. Doing so could generate electronic noise that
could damage your speakers, etc.
* To turn off the timer, press STOP button for 2 seconds.
(“Timer Off” will be displayed.)
w Load a disc and turn into stand-by mode.
* If program play has been set, program play will begin
upon the timer on.
16
TROUBLE SHOOTING
If you think a malfunction has occurred, first check the points
listed below, The problem is likely to have been caused by a
simple operational error or a connection problem. If the
problem cannot be corrected even after carrying out the
following checks, consult your dealer or nearest Marantz sales
office or service counter.
•
Some channels are not played (Super Audio CD Multi-
Channel)
•
The disc fails to rotate.
1. Is the mains lead plugged in properly?
2. Is the POWER switch ON?
1. Confirm the number of channels in the disc. (See page
11)
3. Is the disc placed in the correct position on the disc tray?
4. Is the disc placed properly with the label side facing up?
5. Is the disc dirty?
•
A CD-R/CD-RW disc cannot be played.
1. Is the disc placed upside down?
6. Is the disc scratched?
2. Is the disc contains properly written TOC?
3. Is the recorded information in an audio (CD-DA) format?
7. Is the disc warped?
•
The disc is rotating but no sound is heard.
1. Are the amplifier and speakers connected properly?
2. Is the amplifier switch ON?
3. Is the amplifier’s volume control set at the minimum level?
4. Is the amplifier’s selector switch set to the correct input
(“CD” or “AUX”, whichever corresponds to the input jacks
the SACD player is connected to)?
•
The disc stops in mid-operation.
The sound drops out or noise is heard.
1. Is the disc dirty?
2. Is the disc scratched?
3. Is the disc warped?
* In the case of a CD-R or CD-RW disc, this problem may
occur when the conditions under which its data was
originally written were substandard or when the quality of
the disc itself is poor.
•
Remote control operation is not possible.
1. Is the remote control unit’s transmitter pointed correctly at
the remote sensor on the front of the SACD player?
Or is there an obstruction between the transmitter and the
remote sensor?
2. Are the batteries in the remote control unit exhausted?
3. Is there another strong light (from a window, etc.) striking
the SACD player’s remote sensor?
•
A Super Audio CD cannot be played.
1. Is the disc scratched, dirty or warped?
2. Is the amplifier’s input selector set to digital?
* Digital audio signal will not be output when a Super Audio
CD is played.
17
18
SPECIFICATIONS
Super Audio CD
CD
Audio Characteristics
Analog output
Channels
6channels (Max.)
2Hz — 100kHz
2Hz — 50kHz (-3dB)
113dB
2channels
2Hz — 20kHz
2Hz — 20kHz
100dB
Frequency range
Frequency characteristics
Dynamic range
THD (1kHz)
0.0015%
0.0020%
wow & flutter
Precision of quartz
2.2V
Precision of quartz
2.2V
Output level
Digital output
output level (cinch JACK)
output level (optical)
Headphone output level
—
0.5Vp-p (75Ω)
-19dBm
—
50mW / 32Ω (max, Vol.)
50mW / 32Ω (max, Vol.)
Optical Readout System
Laser
AlGaAs
650nm
AlGaAs
780nm
Wave length
Signal format
1-bit DSD
16-bit linear PCM
Sampling frequency
2.8224MHz
44.1kHz
Power Supply
Input Voltage, Frequency ............................................................................................ AC 120V 60Hz
Power Consumption....................................................................................................................... 28W
Power Consumption (Stand-by)................................................................................................. <0.8W
Cabinet, etc.
Dimensions (Width × Height × Depth) .................................................................. 440 × 124 × 307mm
Net weight .................................................................................................................................... 7.7kg
Operating temperatures ................................................................................................ +5ºC ~ +35ºC
Operating humidity ........................................................................................... 5 ~ 90% (without dew)
Accessories
• Remote control unit (RC8260SA).................................................................................................... 1
Dimensions (Width × Height × Depth) .................................................... 48.5 × 21.5 × 152.5mm
Net weight (without Batteries) ................................................................................................ 60g
• AA (R6) Batteries ............................................................................................................................ 2
• AC Power cord ............................................................................................................................... 1
• Audio cable ........................................................................................................................... 3 pairs
• Remote connection Cable .............................................................................................................. 1
• User’s Guide ................................................................................................................................... 1
• Warranty Card ......................................................................................................................... 1 pair
Specifications subject to change without prior notice.
55
Front of player
SUPER AUDIO CD PLAYER SA8260
STEREO
SACD
MULTI
CD
DISPLAY OFF
PLAY
STOP
PAUSE
OPEN/CLOSE
/
/
STANDBY
POWER ON/STANDBY
PHONES
LEVEL
SOUND MODE
TIME
TEXT
DISPLAY
-
+
Display
Remote Control
RNDM PROG
A — B RPT
1
OPEN/
DISPLAY OFF
SOUND MODE
POWER
REPEAT
CLOSE
TRK
TL TIME
1
2
5
8
0
3
6
AMS
RANDOM
A-B
4
TEXT 1 2
3 4 5 6 7 8 910 112 1314 1516 1718 1920
7
9
PROGRAM
CANCEL
Main display
A-B : A-B Repeat indicator
RPT 1 : Repeat indicator
: Pause indicator
TIME
TEXT : TEXT indicator
SCROLL/
RECALL
TEXT
1~20,
: Track Number indicator
RNDM : Random indicator
PROG : Program indicator
TRK : Track indicator
TTL : Total indicator
: Play indicator
TIME : Time indicator
RC8260SA
Rear of player
AC IN
MULTI CHANNEL AUDIO OUT
SURROUND
CENTER
SUB
WOOFER
L
R
FILTER
DIGITAL AUDIO OUT REMOTE CONTROL
FRONT
OPT. COAX.
IN
L
R
STAN-
DARD
CUS-
TOM
EXT.
INT.
OUT
56
COUNTRY
ALGERIE
COMPANY
Azur 2000
ADDRESS
8, Lotissement Ben Hatadi, Alger, Algerie
ARMENIA
AUSTRALIA
AUSTRIA
BAHREIN
BANGLADESH
BELGIUM
NGYIG Ltd.
47 A/75 St. Lalaiants, 375000 Yerevan, Armenia
24 Lionel Road, Mt. Waverley, VIC 3149, Australia
Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria
P.O. Box 237,141, Government Avenue, Manama,Bahrein
1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh
Brusselbaan 278, 9320 Erembodegem, Belgium
Makedonia Blvd. 16, 1606 Sofia, Bulgaria
Jamo Australia Pty. Ltd.,
Huber & Prohaska GmbH
Ambassador Stores
Target
Van der Heyden Audio N.V.
Ariescommerce GmbH
BULGARIA
CANADA
CHINA
Lenbrook Industries Limited
633 Granite Court, Pickering, Ontario
Guang Chang Audio International Co., Ltd. No.38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China
CYPRUS
CZECH REPUBLIC
DENMARK
DUBAI
Empire Hifi systems Ltd.
Audio International
Audio Nord
P.O. Box 5604, Nicosia, Cyprus
Sokolska 41, 67902 Rajecko, OKR,Blansko, Czech Republic
Dali Allé 1, 9610 Noerager, Denmark
V.V.& SONS
P.O. Box 105, Dubai, U.A.E.
EGYPT
Solimco
9, El Attibaa St. Doki, Cairo, Egypt
ESTONIA
F.Y.R.O.M.
FINLAND
FRANCE
GERMANY
GREECE
HiFi Club Estonia
T.P. KODI
Audio Nord
Marantz France
Marantz Deutschland
Adamco S.A.
Ehte 4, 90503 Haapsalu, Estonia
ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija
Uudenmaankatu 4-6, Helsinki SF-00120, Finland
A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France
Hakenbusch 3, 49078 Osnabrück, Germany
188, Hippocratous Street, 11471 Athens, Greece
Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
Unit 1706, Metroplaza II, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong
Terez Krt.31, 1067 Budapest, Hungary
HEADQUARTERS EUROPE: Marantz Europe B.V.
HONG KONG
HUNGARY
ICELAND
INDIA
IRAN
IRELAND
ISRAEL
ITALY
IVORY COAST
JAPAN
KOREA
KUWAIT
LATVIA
Marantz Asia Ltd.
Infovox Ltd.
ID Electronics Ltd.
NOVA Audio Private
Home Co.
Armula 38, 108 Reykjavik, Iceland
8,Punam Co-op.Society 29/30 Road#5, Union Park MUMBAI 400052, India
5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran
Clonskeagh, Dublin 14, Ireland
52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel
Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde
B.P. 2428, Abidjan 01, Ivory Coast
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
121-210, 2F Shinhan Bldg., 247-17 Seokyo-dong, Mapo-ku, Seoul, Korea
P.O. Box 8196, Salmiah 22052, Kuwait
Marantz Ireland
Elmor Ltd.
Marantz Italy
Hifivoir
Marantz Japan Inc.
Mk Enterprises Ltd.
alAlamiah Electronics Intl.
Ace Ltd.
61, LacPlesa Str., Riga LV 1011, Latvia
LEBANON
LITHUANIA
MALAYSIA
MALTA
AZ Electronics S.A., 1,
Accapella Ltd.
P.O. Box 11 2833, Beirut, Lebanon
Ausros, Vartu G/5, Pasazo SKG., 2001 Vilnius, Lithuania
Wo Kee Hong Electronics Sdn. Bhd. Suite 8.1, Level 8, Menara Genesis, No. 33, Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia
Doneo Co Ltd.
78 The Strand, Sliema SLM07, Malta
MAURITIUS
SKR Electronics Ltd.
P.O. Box 685, Bell Village, Port Louis, Mauritius
MILITARY MARKET EUROPE PASCO GmbH
PO BOX 1280, Sandhausen 69200, Germany
NETHERLANDS
NEW ZEALAND
NORWAY
Marantz Domestic Sales
Wildash Audio Systems
Audio Nord
A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
14 Malvern Road, Mt. Albert, Auckland, New Zealand
Sandkerveien 64, Oslo 0483, Norway
OMAN
POLAND
PORTUGAL
PROFESSIONAL EUROPE
PROFESSIONAL U.S.A.
QATAR
REUNION
ROMANIA
RUSSIA
Mustafa & Jawad Trading CO.
Philips Polska Sp. z.o.o.
Corel2
Marantz Professional Products
Marantz Professional Products
Almana & Partners W.W.L.
Vision +
P.O. Box 1918, Ruwi, Oman
Al.Jerozolimskie 195b, 02 222 Warszawa, Poland
Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, Illinois
P.O. Box 49, Doha, Qatar
180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion
5, Zagazului Str. Bl.1G,apt.18, sector 1,Bucharest, Romania
7/2, Montazhnaya Street, 107497 Moscow, Russia
Nova Music Entertainment
Absolute Audio
SAUDI ARABIA
SINGAPORE
SLOVAKIA
SLOVENIA
SOUTH AFRICA
SPAIN
Adawlia Univ. Electr. Apl
Wo Kee Hong Distribution PTE Ltd.
Bis Audio s.r.o.
P.O. Box 2154, Alkhobar 31952, Saudi Arabia
130 Joo Seng Road, #03-02 Olivine Building, Singapore 368357
Nam. SNP 10, 96001 Zvolem, Slovakia
Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia
P.O. Box 1614, Alberton, 1450, South Africa
Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain
Mezzanine Floor, The Landmark 385, Galle Road, Colombo - 3, Sri Lanka
Almedalsvagen 4, Gotenborg 402-23, Sweden
Bofex
Coherent Imports (PTY) Ltd.
Marantz Spain
The listening Room
Audio Nord
SRI LANKA
SWEDEN
SWITZERLAND
SYRIA
TAHITI
TAIWAN
THAILAND
TUNESIA
TURKEY
U.K.
U.S.A.
YUGOSLAVIA
Sound Company AG
Hamzeh & Partners
Covecolor
Pai-Yuing Co. Ltd.
MRZ Standard Co. Ltd.
Societe EDEVIG
Postfach, 8010 Zürich, Switzerland
Hafez Ibrahim Str. No 117, Damascus Shalan, Syria
Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti
6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C.
746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand
40, Avenue du Golfe Arabe, El Menzah, 1004, Tunesia
Yukari Dudullu Organize sanayi Bolgesi, 2.Cadde no.28, 81260 Umraniye-Istanbul, Turkey
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
1100 Maplewood Drive Itasca, IL 60143, U.S.A.
Türk Philips Ticaret A.S.
Marantz Hifi UK Ltd.
Marantz America Inc.
ITM Company
Omladinskih Brigada 86, 11070 Belgrade, Yugoslavia
EXPORT
Marantz Domestic Sales
A division of Marantz Europe BV,Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
is a registered trademark.
02/02 MITs 01AK851250
Printed in Japan
|